API & Configuration Documentation
How To: Configure QSFP+ ports of an MXnet 10G Network Switch to operate as 4 10G SFP+ ports (4x10G Breakout Mode)
This article provides step-by-step instructions on how to configure one or multiple QSFP+ ports to operate as 4 10G SFP+ ports (to be utilized with a 4x10G breakout cable (The breakout cable SKUs are the following: AC-40G-BOC-01, AC-40G-BOC-02, ...
How to: Export Configuration Files from a Switch to a TFTP Server
Overview This document describes how to export the current configuration file of a switch to a Trivial File Transfer Protocol (TFTP) server. This process is essential for network administrators to back up switch configurations and to ensure smooth ...
How to: Enable Port Mirroring on an AVPro MXNet Switch
What is Port Mirroring? Port mirroring, also known as port monitoring or network tapping, is a feature in network switches that allows the network administrator to copy and send network traffic from one port (or group of ports) to another port for ...
MXNet Network Switches - Configuration and Command Guides
This article includes two documents (located at the bottom of this page as attachments) for general and specific requirements when configuring AVPro's MXNet network switches. For a basic overview of connecting to the switch, accessing the CLI, and ...
How to: Uplink Two AC-MXNET-10G-SW12C Switches
Introduction This article guides you through the various methods of uplinking (stacking) the AC-MXNET-10G-SW12C network switch, providing connection diagrams, configuration files, and other relevant information. NOTE: Due to bandwidth constraints, it ...
How-to: Configuring MXNet Network Switches to Enable Dante™ and MXNet AVoIP Traffic on the Same VLAN
This article is a comprehensive set of instructions for configuring the following MXNet network switches in order to run Dante audio traffic on the same VLAN as the MXNet encoders and decoders: AC-MXNET-SW10 AC-MXNET-SW24 AC-MXNET-SW48 Note: The ...
MXNet Network Switches - Basic Operation Configuration Guide
This article provides a comprehensive overview of basic diagnostic and configuration commands for MXNet network switches, including instructions for making the necessary physical connections. The switches covered in this article are operating on ...