MXNet 1G Encoders
AC-MXNET-1G-EV2-C ~ V3.01 ~ 03-22-24
NOTICE: Please update the CBOX first before attempting an update on any endpoints. If your AC-MXNET-EV2 device is listed as an AC-MXNET-1G-EV2-B or showing firmware as V2.XX, please navigate to this article here: ...
AC-MXNET-1G-AVDM-EV2 ~ V3.02 ~ 10-19-23
NOTICE: Please update the CBOX first before attempting an update on any endpoints. Note: If your AC-MXNET-1G-AVDM-EV2 is showing firmware as V2.XX instead of V3.XX as listed here, use the latest firmware on this page: ...
AC-MXNET-1G-DANTE-E ~ V1.16 ~ 9/08/23
NOTE: AC-MXNET-1G-DANTE-E V1.16 requires your AC-MXNET-CBOX to be updated to V2.55 / AC-MXNET-CBOX-B to V4.09 or later, or you may have issues with RS-232 transmissions. V1.16 Fixed an issue where MCU commands would bleed out of the RS-232 port of ...
AC-MXNET-1G-EV2-B ~ V2.04 ~ 09/08/23
NOTICE: Please update the CBOX first before attempting an update on any endpoints. Release Notes: V2.04 Fixed an issue where MCU commands could bleed out of the RS-232 port of the endpoint. Added a 2ch audio description for the 1920x1200 EDID. V2.02 ...
How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.
If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...
AC-MXNET-1G-EV2 ~ V1.10 ~ 09/08/23
NOTICE: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-EV2 firmware V1.10 Requires CBOX V2.55 or CBOX-B V4.09, or higher in order for RS-232 communication to function properly. Note: If your EV2 unit is ...
AC-MXNET-1G-EWP ~ (V1 WALL PLATE) ~ V1.11 ~ 4/5/24
V1.11 Added HDCP Do not Request option. V1.10 Fixed an issue where MCU commands could bleed out of the RS-232 port of the endpoint. Added a 2ch audio description for the 1920x1200 EDID. V1.08 Adjusted the video signal input tolerance levels, to fix ...
AC-MXNET-1G-E / AC-MXNET-1G-AVDM-E ~ (ENCODER) ~ V3.44 ~ 09/08/23
If you current encoder firmware is on version 3.33 -> 3.37, you must first follow this article here. NOTE: AC-MXNET-1G-E firmware V3.44 requires CBOX V2.55 or CBOX-B V4.09, or higher in order for RS-232 communication to function properly. Release ...