[URC] MXNET 1G CBOX Driver

[URC] MXNET 1G CBOX Driver

Link to driver: Download Driver

Control System: URC
Version: 1.4.2
Release Date: 30 MAR 2023

Supported Products:
     
  1. AC-MXNET-CBOX (1G)

Changelog:
v1.4.2:
Bug Fix
      - Fix memory leak
      - Fix to One Way Switching
v1.4.0:
      - Added Recall Mosaic Layout
      - Move over to "vwid" API
v1.3.0:
      - Updated User Guide For Accelerator 3
v1.2.0:
      - Move to TCP port 24
      - Add string/hex choice for encoding serial commands
      - Add command to send a custom image for given Decoder
      - Add recall video wall layout command
      - Add ability to send custom API command strings
      - Prevent/remove spaces in video wall names
      - Updated documentation for new Mentor web UI
      - Move sample project to Accelerator 3


    • Related Articles

    • How To: Using the MXNET API ~ V1.19.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.19.1 Control Box Version: 2.55 and above Instructions and API attached
    • AC-MXNET-CBOX Application Diagram

      AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.
    • AC-MXNET-CBOX ~ V2.63 ~ 12/21/2023

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...
    • AC-MXNET-CBOX Manual

      AVPro Edge is committed to reducing our carbon footprint; Click the Link Below for an Up to Date Manual: MXNet 1G Manual
    • MXNet Control4: Initial Driver Setup - Janus - Off-Site Pre-Commission

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...