[RTI] MXNET 1G CBOX Driver
Control System: RTI
Version: 2.6
Release Date: 24 AUG 2023
Supported Products:
- AC-MXNET-CBOX-1G
Changelog:
v2.6:
- Added Volume Support
- Updated to handle 10g/1g Differences
- Added Tiler support
- Added Events for Hotplugs Connected and Disconnected
- Added Hotplug Variables
- Added Hotplug Reset
- Split 10G/1G models to separate releases
v2.1:
- Added Support For Video Wall Mosaic Layout Active
- Migrated to JSON API (port 24)
- Added support for setting Receiver Display to Stored Images
- Added support for sending arbitrary API commands
- Added Video Wall Layout recall
v1.4:
- Remove sending Set RS232 mode - this was causing the device to restart, and so was missing baud-rate settings
- Fix Sending RS232 containing escaped characters
- Changed combined audio/video switch to use single command
v
1.2:
- Added IR Output
Related Articles
[RTI] MXNET 10G CBOX Driver
Link to driver: Download Driver Control System: RTI Version: 2.6 Release Date: 24 AUG 2023 Supported Products: AC-MXNET-10G-CBOX Changelog: v2.6: - Added Volume Support - Updated to handle 10g/1g Differences - Added Tiler support - Added Events for ...
How To: Using the MXNET API ~ V1.21.1
Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.21.1 Control Box Version: 2.71 and above Instructions and API attached
[Extron] MXNET 1G / 10G Driver Suite
Link to module: Download Module Suite Control System: Extron Developer: Control Concepts Inc. Version: 1_0_0 Release Date: 19 NOV 2024 Supported Products: AC-MXNET-CBOX (1G) AC-MXNET-10G-CBOX (10G) Changelog: v1_0_0 - Initial Release
AC-MXNET-CBOX Application Diagram
AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.
AC-MXNET-CBOX ~ V2.71 ~ 9/18/24
NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...