Changelog:
v1.7:
- Command Processor:
- Resolved an issue with the pins for the RS232 encapsulation functionality between Encoder and Decoder.
v1.4:
- Command Processor:
- Updated to provide automated handling of offline devices and allow for suite to
initialize even if some devices are missing or offline.
– Encoder:
- Updated to provide automated handling of offline devices and allow for suite to
initialize even if some devices are missing or offline.
- Added additional missing device options for “Device Model” property
- Decoder:
- Updated to provide automated handling of offline devices and allow for suite to
initialize even if some devices are missing or offline.
- Added additional missing device options for “Device Model” property
- Matrix Router:
– Updated to provide automated handling of offline devices and allow for suite to
initialize even if some devices are missing or offline.
- Video Wall:
- Retain previous values set for display encoder/decoder/rotation after program restart.
- Fix bug preventing setting static/startup values on display encoder/decoder/rotation pins.
- Sorted all dropdown lists alphabetically.
- Added 10G Video Wall Layout support.
v1.3:
– Command Processor:
- Added additional queue level specifically for RS-232 commands so that a large
number of queued RS-232 commands don’t prevent other standard commands from going out
- Add Status Print functionality
- Fixes/optimization to component registration, polling, command pacing and reconnection login
– Encoder:
- Sanitize/standardize RS-232 input/output formatting
- Add single Serial Port pin to allow for connecting directly to corresponding Serial Port pin on other plugins
- Add “Device Model” property to allow for differences between different devices
- Remove volume controls for some device type/model configurations
- Adjust to handle different EDID tables for different devices
- Decoder:
- Sanitize/standardize RS-232 input/output formatting
- Add single Serial Port pin to allow for connecting directly to corresponding Serial
Port pin on other plugins
- Add “Device Model” property to allow for differences between different devices
- Remove “OSD” and “Aspect Ratio” controls for some device type/model configurations
- Add extracted audio volume control for 10G decoders
- Matrix Router:
- Fix occasional issue with feedback jumping to old value after making a route.
- Add breakaway USB routing.
- Video Wall:
– Fix issue with duplication of items in lists upon reinitialization
- Remove requirement for volume information in order to initialize due to wallplate
encoders not including this as part of the information query response
- Remove requirement for OSD information in order to initialize due to issue on some
- Fixed offset issues with list paging which was causing incorrect inputs/outputs to be selected
- Fix issue with unsolicited events not being handled if using Custom Name instead of MAC