This article includes two documents (located at the bottom of this page as attachments) for general and specific requirements when configuring AVPro's MXNet network switches.
For a basic overview of connecting to the switch, accessing the CLI, and examples of commands used to configure an MXNet switch, see this
KB Article.
Included in the Configuration Guide:
1. Basic Management Configuration
2. Port Configuration
3. VLAN and MAC Address Configuration
4. MSTP Configuration
5. QoS and Flow-based Redirection Configuration
6. L3 Forward and ARP, ND Configuration
7. DHCP Configuration
8. Routing Protocol
9. Multicast Protocol
10. Security Function Configuration
11. Reliability Configuration
12. Flow Monitor Configuration
13. Debugging and Diagnosis
14. Network Time Management Configuration
15. PoE Configuration
16. VSF Configuration
17. Info-center Configuration
Included in the Command Guide:
1. Commands for Basic Switch Configuration
2. Commands for Port Configuration
3. Commands for VLAN and MAC Address Configuration
4. Commands for MSTP
5. Commands for QoS and Flow-based Redirection
6. Commands for Layer 3 Interface and ARP, ND
7. Commands for DHCP Server Configuration
8. Commands for Routing Protocol
9. Commands for Multicast Protocol
10. Commands for Security Function
11. Commands for Reliability
12. Commands for Flow Monitor
13. Commands for Debugging and Diagnosis
14. Commands for Network Time Management
15. Commands for PoE
16. Commands for VSF
17. Commands for Info-center