MXNet: AV over IP Complete System Set-Up! (With TIMER!)

MXNet: AV over IP Complete System Set-Up! (With TIMER!)

John Tumbleson (The Mind Behind MXNet Mentor) and Tom Devine (Noob) put together an entire AV over IP system using MXNet Encoders, Decoders and an MXNet Network Switch racing against the clock to complete the system as fast as they can! 

The goal of this video is to show integrators how easy it can be setting up a system with MXNet AV over IP Ecosystem. 

If you enjoyed this video consider subscribing here:

    • Related Articles

    • MXNet Ecosystem Training

      Dolby Vision Support, Dolby Atmos Downmixing Support, Quick Switching, endless sources routed to endless displays; Welcome to MXNet. Join Tom and John from AVPro as they give integrators an introduction to the AV over IP/Networked AV system called ...
    • AV Term Glossary

      -2 piece projection - A 2 piece projection system consists of a light engine shining light onto a screen. The light engine can be placed in front of (front projection) or behind (rear projection) the screen  -2/3 pulldown – a method of video ...
    • How To: MXNET System Design Summary

      This video is brought to you by Kevin Wang, Director of Product Management. MXNet is the AV over IP  video distribution ecosystem from AVPro Edge. With the MXNet Ecosystem,  integrators finally have an end-to-end solution developed with them in mind. ...
    • MXNet Control4: Videowall Setup Guide

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...
    • How To: Using the MXNET API ~ V1.19.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.19.1 Control Box Version: 2.55 and above Instructions and API attached