AC-MXNET-10G-CBOX ~ API Document

MXNet 10G - API ~ V1.05

The PDF file attached to this article contains available API commands for the MXNet 10G ecosystem. You can connect to the AC-MXNET-10G-CBOX using PuTTY (Connection Method: Telnet, use TCP Port 24) to execute the commands listed in the API documentation, or utilize the API commands listed in this PDF file for device specific programming on third party control systems. 

API Version: V1.05
CBOX Version requirement: V3.26 or higher

    • Related Articles

    • How To: Using the MXNET API ~ V1.21.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.21.1 Control Box Version: 2.71 and above Instructions and API attached

    • AC-MXNET-CBOX ~ V2.71 ~ 9/18/24

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • AC-MXNET-CBOX-B ~ V4.21 ~ 9/18/24

      NOTE: If your CBOX is reading firmware with a version number of V2.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-firmware Please update the CBOX first, before attempting updates on the ...

    • AC-MXNET-10G-CBOX ~ V3.40 ~ 4/24/24

      Note: Please update your CBOX first before updating your TCVRs. V3.40 Bug Fixes and Improvements Fixed an issue where certain diagnostic information would continuously populate in the system log (such as "GET MODELNAME" queries). Resolved certain ...

    • AC-MXNET-CBOX Application Diagram

      AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.