How To: MXNET System Design Summary

How To: MXNET System Design Summary

This video is brought to you by Kevin Wang, Director of Product Management.

MXNet is the AV over IP  video distribution ecosystem from AVPro Edge. With the MXNet Ecosystem,  integrators finally have an end-to-end solution developed with them in mind. Our engineering team focused on three things, the stability of the entire system, interoperability with any HDMI source, display, USB device, or control system, and easy deployment of the entire system. MXNet allows for unlimited sources, displays, USB devices & video walls; MXNet is the perfect video distribution system for your next installation. 
WHAT MAKES MXNET DIFFERENT?
All system Components Designed Engineered and Manufactured by Us
Our #1 goal is Ease of Deployment with a long-term stable solution


    • Related Articles

    • AC-MXNET-CBOX ~ V2.55 ~ 09/08/2023

      Note: Using firmware V2.55 for the CBOX requires the following in order for RS-232 communication to function properly: AC-MXNET-1G-D Decoders must be updated to V4.25/V4.28. AC-MXNET-1G-E Encoders must be updated to V3.44. AC-MXNET-1G-EWP Wall Plate ...
    • MXNet Control4: Incorrect Encoder/Decoder Assignment Correction

      If one or more encoder(s) or decoder(s) were installed in the incorrect locations, and the video switching events are switching the incorrect output, the encoder(s)/decoder(s) need to be swapped in the Control4 driver. This guide will show you the ...
    • MXNet Control4: Videowall Setup Guide

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...
    • MXNet: AV over IP Complete System Set-Up! (With TIMER!)

      John Tumbleson (The Mind Behind MXNet Mentor) and Tom Devine (Noob) put together an entire AV over IP system using MXNet Encoders, Decoders and an MXNet Network Switch racing against the clock to complete the system as fast as they can!  The goal of ...
    • MXNet Control4: Initial Driver Setup - Janus - Off-Site Pre-Commission

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...