Matrix Switch Web GUI Tutorial

• Related Articles

• Audio Bindings using Control4 and the AVPro Edge AC-MX-??(HDBT), AXION, or Legacy Matrix

  There are three ways of using the AVPro Edge Matrix in conjunction with a C4 Control System for Audio Distribution: 1. Bind to Input - I am using with another Audio Matrix (i.e. Triad AMS8) Under the System Design tab, Set the Matrix Driver Audio ...

• Audio Bindings using Savant with legacy, AC-MX-??(HDBT), or AXION Matrix

  There are two ways of using the AVPro Edge Matrix in conjunction with a Savant Control System for Audio Distribution: 1. Bind to Input - I am using with another Audio Matrix (i.e. PAV-SIPA125SM) Begin by setting the matrix in Bind to Input Mode; This ...

• How To: Using the MXNet USB Control Tool

  Powerpoint and software for the USB Control Tool used when configuring Point To Point, Multicast Settings, and Control Routing.

• Third-party Switch Requirements and Settings for Running AVPro Edge MXNET AVoIP System

  Third-party Switch Requirements and Settings for Running AVPro MXNET AVOIP System Third-party network switches must support the following features and functionalities and enable or disable some settings in order to support the AVPro MXNET AV-over-IP ...

• How to: Setup and Configure an MXnet Network Switch for AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 Devices.

  Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...