How To Build Video Walls and Video Wall Layouts Presets

How To: Build Video Walls and Video Wall Layouts Presets

Learn to construct Video Walls and configure preset layouts using the MXNet API and Mentor GUI.
This Presentation is brought to you by Kevin Wang, Director of Product Management.
    • Related Articles

    • AC-MXNET-CBOX ~ V1.97 ~ 08/10/2022

      Note: Using firmware v1.97 for the AC-MXNET-CBOX requires the following:       All AC-MXNET-1G-R or AC-MXNET-1G-D Receivers/Decoders must be updated to v3.30 or 4.17.       All AC-MXNET-1G-T or AC-MXNET-1G-E Transmitters/Encoders must be updated to ...
    • How To: Build a Video Wall

      This video is starting point when building a video wall, we go over the different things you need to consider before starting your build. If you have additional questions about video wall set-ups reach us at Thanks for watching!
    • How To: Building a Video Wall

      A video wall doesn’t have to be the challenge most installers see it as today. In this article we have put together a step-by-step guide to use when building a video wall. In a culture of smart phones and short attention spans, a dynamic video wall ...
    • MXNet Control4: Videowall Setup Guide

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...
    • AC-FRESCO-CAP9: 1x9 4K HDR Video Wall Processor

      In this video Tom covers the Fresco Cap 9 Video Wall Processor. Capable of 3x3 4K HDR and Dolby Vision Video Walls. If you enjoyed this video consider subscribing here: