How To: MXNet Proper Network Connections

How To: MXNet 1G Proper Network Connections


    • Related Articles

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...
    • An Introduction Guide to the AC-MXNET-DANTE-CBOX

      An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. ...
    • MXNet Network Switches - Basic Operation Configuration Guide

      This article provides a comprehensive overview of basic diagnostic and configuration commands for MXNet network switches, including instructions for making the necessary physical connections. The switches covered in this article are operating on ...
    • How to: Setup and Configure an MXnet Network Switch for AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 Devices.

      Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...
    • How To: Using the MXNET API ~ V1.26.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.26.1 Control Box Version: V4.26 and above Instructions and API attached