Hercules Setup Utility (SERIAL/TCP/UDP)
Hercules SETUP utility is useful serial port terminal (RS-485 or RS-232 terminal), UDP/IP terminal and TCP/IP Client Server terminal. It was created for HW group internal use only, but today it's includes many functions in one utility and it's Freeware! With our original devices (Serial/Ethernet Converter, RS-232/Ethernet Buffer or I/O Controller) it can be used for the UDP Config.
Download Here: Hercules
Features:
Complete support for Windows 7, 8, 8.1 and 10
All basic TCP and UDP utilities in one file, no installation required (just one .EXE file)
Implemented Serial Port Terminal is working with the Virtual Serial Ports (COM12 for example). You can check and control all serial port lines (CTS, RTS, DTR, DSR, RI, CD)
Simple TCP client (like the Hyperterminal) with the TEA support, view format, file transfers, macros..
Easy to use TCP Server with the TEA support, view format, file transfers, macros..
Hercules contains simple UDP/IP "Terminal" with view formats, echo, file transfers, macros..
Support the NVT (Network Virtual Terminal) in the Test mode tab, as like as NVT debuging features..
Using Telnet extended with NVT allows serial port configuration (RFC2217), device identification, confirmation of data sequence, etc.
It's FREEWARE you can use and share this software free
Find Out More Here: https://www.hw-group.com/software/hercules-setup-utility
Related Articles
Uart RS232/Serial Communicator
MyUart program and USB Serial Driver attached. Can be used with any AVPro Edge product that features an RS232/ISP Control port.How To: Change MXNet endpoints and Cbox to DHCP
In this presentation Kevin Wang, Director of Product Management, demonstrates features presented in the MXNet 1G Ecosystem. DHCP Mode To meet the commercial market requirements, the MXNET 1G system supports the DHCP mode, which means all MXNET 1G ...MXNet Control4: Initial Driver Setup - Janus - Off-Site Pre-Commission
The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...How To: MXNet Point to Point Setup
This presentation demonstrates how to setup point to point extension with an MXNet Encoder and Decoder. MXNet AVoIP are a great solution in installations where the Category Cabling cannot meet the demand of HDBaseT. Brought to you by Kevin Wang, ...MXNet Control4: Videowall Setup Guide
The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...