[ELAN] MXNET Dante Router

• Related Articles

• How to: Setup and Configure an MXnet Network Switch for AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 Devices.

  Overview This will be a configuration guide for configuring an MXnet network switch to work in tandem with the AC-MXNET-1G-DANTE-EV2 and AC-MXNET-1G-DANTE-DV2 devices. The new AC-MXNET-1G-DANTE-EV2/DV2 products use tagged traffic to allow for MXnet ...

• How-to: Configuring MXNet Network Switches to Enable Dante™ and MXNet AVoIP Traffic on the Same VLAN

  This article is a comprehensive set of instructions for configuring the following MXNet network switches in order to run Dante audio traffic on the same VLAN as the MXNet encoders and decoders: AC-MXNET-SW10 AC-MXNET-SW12 AC-MXNET-SW24 AC-MXNET-SW48 ...

• [ELAN] MXNET 10G SDVOE Driver

  Link to driver: Download Driver Control System: ELAN Version: 1.0.7 Release Date: 26 NOV 2024 Supported Products: AC-MXNET (CBOX) 10G Changelog: v1.0.7: -Enhancements - Volume support -Bug Fix - RS232 command reboots TX/RX fix v1.0.6: - 10G release - ...

• AC-MXNET-1G-DANTE-DV2 ~ V4.01 ~ 03/13/2025

  NOTICE: Please update the CBOX first before attempting an update on any endpoints. If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to ...

• An Introduction Guide to the AC-MXNET-DANTE-CBOX

  An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. ...