[Crestron] MXNET 1G / 10G Module Suite

[Crestron] MXNET 1G / 10G Module Suite

Link to module: Download Module Suite

Control System: Crestron
Developer: Control Concepts Inc.
Version: 2.6
Release Date: 18 APR 2025

Supported Products:

  • AC-MXNET-CBOX (1G)
  • AC-MXNET-10G-CBOX (10G)


Changelog:
v2.6:
      -Increased reconnect window time to 90 seconds.
v2.4:
      - Added Matrix PresetRecall module.
v2.3:
      - Added the ability to send CEC support for encoders using the SerialCEC module.
v2.1:
      - Adjusted modules to prevent all the states of offline components from refreshing every offline
        check. 
      - Devices will report back as "null" only when devices and associated components fall offline.
      - Added the "10G VW Layout" module.
      - Added volume support for applicable 10G decoders.
v2.0:
      - Added the ability to have endpoints in the program but not online. Previously, this would prevent the
        module (control processor in particular) from initializing and
        prevent the online devices from being controlled.
      - Polling will happen more frequently but will only poll for one component’s states at a time. This
         prevents serial control from getting backed up behind a global system poll.
v1.2:
      - Isolated serial communication queue to provide better device control responsiveness.
BUGFIX
      - Corrected unsolicited data parsing impacting hotplug detected and resolution
v1.1:
BUGFIX
      - SerialPort data transmitting and receiving has been corrected.
      - Encoder blocks will now work with the Wallplate encoders.
                  a. Volume and Screen/light feedback are optional for initialization.
                  b. Please note: If the Wallplate controllers do have volume control, this feedback will not reflect volume data if it is not in the response.
      - Decoder blocks will now initialize with the v2 of the 1G decoders.
                  a. OSD feedback is optional for initialization.
                  b. Please note: If the OSD control does work, this feedback will not reflect the OSD state if it is not in the response.
v1.0
      - Initial Release

    • Related Articles

    • [Extron] MXNET 1G / 10G Driver Suite

      Link to module: Download Module Suite Control System: Extron Developer: Control Concepts Inc. Version: 1_0_0 Release Date: 19 NOV 2024 Supported Products: AC-MXNET-CBOX (1G) AC-MXNET-10G-CBOX (10G) Changelog: v1_0_0 - Initial Release

    • [Crestron] MXNET 1G CBOX Module (Driver)

      Link to driver: Download Module (Driver) Control System: Crestron Version: 1.6.14 Release Date: 22 NOV 2022 Supported Products: AC-MXNET-CBOX Changelog: v1.6.14: - Added RS232 passthrough. (Ensure processor is running version 3.16.109 or higher) - ...

    • How To: Using the MXNET API ~ V1.21.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.21.1 Control Box Version: 2.71 and above Instructions and API attached

    • [Crestron Home] MXNET 1G CBOX Driver

      Link to driver: Download Driver Control System: Crestron Home Version: 1.8.3 Release Date: 16 APR 2025 Supported Products: AC-MXNET-CBOX -Important Note: - Driver provides switching capabilities and limited RS232 Passthrough and built in CEC ...

    • [Crestron Home] MXNET 10G SDVOE Driver

      Link to driver: Download Driver Control System: Crestron Home Version: 1.8.3 Release Date: 07 JAN 2025 Supported Products: AC-MXNET-10G-CBOX -Important Note: - Driver provides switching capabilities only. - Driver limited to 15 x 15 matrix's due to ...