[Crestron Home] MXNET 1G CBOX Driver

[Crestron Home] MXNET 1G CBOX Driver

Link to driver: Download Driver

Control System: Crestron Home
Version: 1.8.1
Release Date: 26 JAN 2024

Supported Products:

  • AC-MXNET-CBOX

-Important Note:

      - Driver provides switching capabilities and limited RS232 Passthrough and built in CEC commands.
      - Driver limited to 15 x 15 using the "MxNet" driver.
      - (Expandable using the "32x32, 64x64, and 100x100" modules which will only allow the add-on of
         -endpoints, these modules are still capped at to only allow 15 sources)
         
      


Changelog:
v1.8.1:
      - Added output volume control
      - Update to SDK 17.0.22
      - Improve stability in AC-MXNET-CBOX communications
v1.7.1:
      - Added RS232 passthrough. Ensure processor is running version 3.16.109 or higher
BUGFIX:
      - No longer loses connection on large systems
v1.6.6:
      - Added Immediate switch feedback
BUGFIX:
      - Fix for crash if no video walls present.
v1.6.4:
      - Added Signal in Video wall module for Mosaic
      - Combined switching to use single command aset :av
      - Remove automatic sending of stream on/off commands with switching
      - Added signal to control sending of stream on/off commands with switching
      - Added missing instructions regarding proper setup of driver to included documentation
BUGFIX:    
      - Fix problem with sending RS232 passthrough commands to devices that didn't have a
      friendly name
v1.5.5:
      - Added Crestron Home Drivers for 32 ,64 and 100 matrix switcher sizes
      - CEC fix for extra space in command
      - Added CEC Control for inputs and outputs
      - Changed how video wall layout recall works. Set layout name via the LAYOUT signal and recall via RECALL_LAYOUT
      - Setting switching input to 0 stops video stream


    • Related Articles

    • [Crestron Home] MXNET 10G SDVOE Driver

      Link to driver: Download Driver Control System: Crestron Home Version: 1.8.1 Release Date: 26 FEB 2024 Supported Products: AC-MXNET-10G-CBOX -Important Note: - Driver provides switching capabilities only. - Driver limited to 15 x 15 matrix's due to ...

    • AC-MXNET-CBOX Application Diagram

      AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.

    • AC-MXNET-CBOX ~ V2.71 ~ 9/18/24

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • [Crestron] MXNET 1G CBOX Module (Driver)

      Link to driver: Download Module (Driver) Control System: Crestron Version: 1.6.14 Release Date: 22 NOV 2022 Supported Products: AC-MXNET-CBOX Changelog: v1.6.14: - Added RS232 passthrough. (Ensure processor is running version 3.16.109 or higher) - ...

    • How To: Using the MXNET API ~ V1.21.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.21.1 Control Box Version: 2.71 and above Instructions and API attached