[Control4] MXNET 1G CBOX Driver

[Control4] MXNET 1G CBOX Driver

Link to driver: Download Driver
Control System: Control4
Version: 108
Release Date: 13 MAR 2024
 

Supported Products:
  1. AC-MXNET-CBOX (1G)
 
 Changelog:
v108:
      - API parity with 10G
v107:
       - Fixed interpretation of video resolution data for MXnet system
       - Fixed video-path disable and audio-path disable when turning off a room
v106:
      - Add volume support
v105:
      - Fix to allow case-insensitive MAC addresses in devicelist
v102:
      - Add Bidirectional serial connections
      - Combined audio/video switch
      - Added Mosaic Video Wall command
      - Update video wall to use "vwid" commands instead of "vw"
v100:
      - Migrated to use JSON API on port 24
      - Added Custom programming command for sending any arbitrary API command
v19:
      - Added Hex encoding option for RS-232 pass through
      - Added a link to the AVPro Edge support website
v18:
      - Added Display Image Custom command
      - Added support for 2x4 video wall with (optional) top-row inversion
      - Added support for 3x4, 4x2, 4x3, 4x4 video walls
      - Added support for 2x3 video wall with (optional) top-row inversion, and also 3x2 video wall
      - Add Custom Command for recall a VideoWall layout that was defined in MXNet WebGUI
      - Fix issue with setting friendly names

    • Related Articles

    • How To: Using the MXNet USB Control Tool

      Powerpoint and software for the USB Control Tool used when configuring Point To Point, Multicast Settings, and Control Routing.

    • How To: Using the MXNET API ~ V1.19.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.19.1 Control Box Version: 2.55 and above Instructions and API attached

    • AC-MXNET-CBOX ~ V2.70 ~ 4/5/24

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • MXNet Control4: Initial Driver Setup - Janus - Off-Site Pre-Commission

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...

    • AC-MXNET-10G-CBOX ~ V3.40 ~ 4/24/24

      Note: Please update your CBOX first before updating your TCVRs. V3.40 Bug Fixes and Improvements Fixed an issue where certain diagnostic information would continuously populate in the system log (such as "GET MODELNAME" queries). Resolved certain ...