[Control4] Videowall Controller

[Control4] Videowall Controller

Link to driver: Download Driver

Control System: Control4
Version: 113
Release Date: 08 FEB 2023

Supported Products:
  1. MXNET
  2. AC-MX9XHDL-HDBT

Changelog:
v112:
ADDED:
      - Added 1x2 and 1x4 videowalls that span the entire wall
      - Added 'Show 1 Source' option to videowall commands for 1x2 and 1x4 walls
BUGFIX:
      - Fixed screen position for 3x2 and 2x3 layouts, when a 2x2 videowall is active
v108:
      - Increased max number of sources to 128
v107:
      - Optimised Wall creation for MXNet from proxy SET_INPUT command
  eliminates sending second source switch command
v106:
      - Added 2x4, 3x4, 4x2, 4x3 & 4x4 videowall options for MXNet

    • Related Articles

    • MXNet Control4: Videowall Setup Guide

      The following guide can be used to configure the MXNet driver within Control4. This guide requires the use of our MXNet driver version 12 or greater. You can find the latest version of the driver here. This guide is intended for an MXNet installation ...

    • How to Build a Pixel-Perfect 1 Row x 2 Column Video Wall with MXNet 10G SDVoE

      Introduction A Pixel-Perfect video wall is display technology utilized by MXNet where multiple screens are arranged in a tiled pattern to create a single large display surface, typically within a Multiview. Each screen in the video wall is calibrated ...

    • FRESCO Video Wall Controller

      Current Version V1.57 Software is for the following units: AC-FRESCO-CAP4 AC-FRESCO-CAP9 Control the FRESCO unit over IP and RS232. Easily set up 2x2 and 3x3 Video Walls with 180° Rotation.

    • AC-MXMV122-UHD Control & Configuration Software

      Current Version: V1.40 Updates: Cropping Added (Requires firmware V1.77) Fixed Audio Following with Preset Selection Control Switching, Multiview, and Configuration over RS232. Preset Duplication Software for transferring configurations to multiple ...

    • How To: Using the MXNet USB Control Tool

      Powerpoint and software for the USB Control Tool used when configuring Point To Point, Multicast Settings, and Control Routing.