NOTE: If the MST MCU is V1.40 or lower, the MCU is unable to be upgraded.
If the MST MCU is V1.60 or higher, the MCU can be upgraded using the Uploader software.
See attachments at the bottom of this page for the latest firmware file and Uploader software.
Please note that the update may take up to 30 minutes to complete.
V1.63
Added API Commands:
SET KEY LOCK ON/OFF
Set Key Lock On/Off
GET KEY LOCK
Get Key Lock Status
Combination key controls:
Press and hold the TEST PATTERN and OUTPUT SETUP keys simultaneously for 3 seconds.
All LED's will blink once, indicating the KEY LOCK is OFF.
All LED's will blink twice, indicating the KEY LOCK is ON.
When KEY LOCK ON mode is enabled and the key is operated, its corresponding indicator will blink
once.