AC-MXNET-1G-EV2WP ~ V1.04 ~ 03/13/2025

NOTICE: Please update the CBOX first before attempting an update on any endpoints.

If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to determine what firmware to load onto your devices: https://support.avproedge.com/portal/en/kb/articles/how-to-determine-the-appropriate-firmware-on-an-mxnet-1g-ecosystem

Release Notes:

v1.04

The device's front panel text will flip positions every 10S after a period of time from when the device is powered on. This is done to mitigate screen burn-in on the LCD display after an extended period of time.
Optimizations to HDR processing, in particular in regards to dynamic HDR metadata.
Added API commands to change how MCU HDR/TMUT messages are processed, via the CBOX.

Related Articles
AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025
NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...
AC-MXNET-10G-TCVR Firmware ~ V1.45 ~ 3/7/2025
NOTE: If your AC-MXNET-10G-TCVR is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...
How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.
If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...
AC-MXNET-10G-TCVR-B Firmware ~ V1.45 ~ 3/7/2025
NOTE: If your AC-MXNET-10G-TCVR-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...
AC-MXNET-10G-TCVR-USBX Firmware ~ V1.45 ~ 3/7/2025
NOTE: If your AC-MXNET-10G-TCVR-USBX is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

AC-MXNET-1G-EV2WP Firmware Page