AC-MXNET-1G-EV2WP-B ~ V2.02 ~ 06/27/2025
NOTICE: Please update the CBOX first before attempting an update on any endpoints.
V2.02
Enhancements:
Added auto switching capabilities.
Feature logic:
- Always switch to the most recently connected input that has an active signal (EX as soon as the USB-C input is live, the wallplate will automatically switch to it if sourceinput was set to the HDMI port. Same goes vice versa)
- If that input is disconnected, automatically fall back to the other input if it still has a signal (USB-C is disconnected BUT HDMI's hotplug is still high, wallplate will automatically switch over to HDMI input, and vice versa)
- If both inputs are disconnected, output no signal.
- Can be disabled with CBOX API command "config set device
Related Articles
AC-MXNET-1G-DV2-B ~ V2.03 ~ 03/13/2025
NOTICE: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-DV2-B Firmware V2.02 requires CBOX firmware V2.55 or later, or CBOX-B firmware V4.09 or later, in order for RS-232 communication to function properly. If ...
AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025
NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...
AC-MXNET-10G-TCVR-PRO-B Firmware ~ V1.45 ~ 3/7/2025
NOTE: If your AC-MXNET-10G-TCVR-PRO-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...
AC-MXNET-10G-TCVR-AVDM-B Firmware ~ V1.45 ~ 3/7/2025
NOTE: If your AC-MXNET-10G-TCVR-AVDM-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...
AC-MXNET-10G-TCVR-B Firmware ~ V1.45 ~ 3/7/2025
NOTE: If your AC-MXNET-10G-TCVR-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...