AC-MXNET-1G-EV2 - V1.XX / V2.XX Firmware Updates

AC-MXNET-1G-EV2 ~ V1.10 ~ 09/08/23

NOTICE: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-EV2 firmware V1.10 Requires CBOX V2.55 or CBOX-B V4.09, or higher in order for RS-232 communication to function properly. 

Note: If your EV2 unit is reporting V2.00 firmware or higher, please visit this page for the correct firmware: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-1g-ev2-b-firmware

Release Notes:
V1.10
  1. Fixed an issue where MCU commands could bleed out of the RS-232 port of an endpoint. 
  2. Added a 2ch audio description for the 1920x1200 EDID.
  3. Fixed an issue where certain cable boxes would drop connection after 20-30 minutes.
V1.08
  1. New Feature: Ability to adjust HDCP request parameters, parameters are "AUTO (HDCP 2.2) or "Do Not Request HDCP". Can be adjusted via the CBOX. Default setting is "AUTO (HDCP 2.2)". 
  2. Fixed an issue where the USER EDID read pull from the CBOX would not display the stored EDID information on V2-B Encoders.

V1.06
  1. Fixed an issue where EDID copy from output was not functioning correctly at times. 
  2. Fixed a buffer overflow issue that could happen over time at higher bandwidth signals, causing the Evolution Two encoder to lock up. 
  3. Fixed an issue where HDCP was always "locked" to output HDCP 2.2.

    • Related Articles

    • How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.

      If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...

    • AC-MXNET-10G-TCVR, TCVR-PRO, TCVR-AVDM, TCVR-USBX Firmware ~V1.26 ~ 1/29/2024

      NOTE: All TCVR models, the base AC-MXNET-10G-TCVR, AC-MXNET-10G-TCVR-PRO, AC-MXNET-10G-TCVR-USBX, and AC-MXNET-10G-TCVR-AVDM share the same firmware. NOTE: Please Update your AC-MXNET-10G-CBOX first before proceeding with updating the firmware on ...

    • AC-MXNET-CBOX ~ V2.70 ~ 4/5/24

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • AC-MXNET-1G-DV2-C ~ V3.00 ~ 11-07-23

      NOTICE: Please update the CBOX first before attempting an update on any endpoints. If your DV2 device is showing as AC-MXNET-1G-DV2-B/showing a firmware version of V2.XX, please navigate to this article here: ...

    • AC-MXNET-1G-DV2-B ~ V2.02 ~ 09/08/23

      NOTICE: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-DV2-B Firmware V2.02 requires CBOX firmware V2.55 or later, or CBOX-B firmware V4.09 or later, in order for RS-232 communication to function properly. ...