AC-MXNET-1G-EV2-C Firmware

AC-MXNET-1G-EV2-C ~ V3.01 ~ 03-22-24

NOTICE: Please update the CBOX first before attempting an update on any endpoints.

If your AC-MXNET-EV2 device is listed as an AC-MXNET-1G-EV2-B or showing firmware as V2.XX, please navigate to this article here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-1g-ev2-b-firmware

Release Notes:

V3.01:
  1. Minor improvements to audio sync processes.

V3.00:
  1. Initial Release. AC-MXNET-1G-EV2-C devices have increased external flash memory storage, to be utilized for potential new features in the future. Otherwise, AC-MXNET-1G-EV2-Cs have the same firmware and feature parity as AC-MXNET-1G-EV2-B firmware V2.02.

    • Related Articles

    • AC-MXNET-1G-DV2-C ~ V3.00 ~ 11-07-23

      NOTICE: Please update the CBOX first before attempting an update on any endpoints. If your DV2 device is showing as AC-MXNET-1G-DV2-B/showing a firmware version of V2.XX, please navigate to this article here: ...

    • AC-MXNET-CBOX ~ V2.70 ~ 4/5/24

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...

    • How To: USB bridge FW update for AC-MXNET-1G-E/AC-MXNET-1G-AVDM-E Versions V3.33 through V3.37.

      If a firmware update was already attempted via the CBOX, and the Encoder OLED is not turning on, or if you're experiencing issues during the update process, please call Technical Support for further assistance. What you'll need: A Windows Based PC A ...

    • AC-MXNET-10G-TCVR, TCVR-PRO, TCVR-AVDM, TCVR-USBX Firmware ~V1.26 ~ 1/29/2024

      NOTE: All TCVR models, the base AC-MXNET-10G-TCVR, AC-MXNET-10G-TCVR-PRO, AC-MXNET-10G-TCVR-USBX, and AC-MXNET-10G-TCVR-AVDM share the same firmware. NOTE: Please Update your AC-MXNET-10G-CBOX first before proceeding with updating the firmware on ...

    • How To: Using the MXNET API ~ V1.19.1

      Kevin Wang, Director of Product Management, goes through using the MXNET API to control and configure the MXNet CBOX Direct. Current API Version: V1.19.1 Control Box Version: 2.55 and above Instructions and API attached