AC-MXNET-1G-DV2-B Firmware Release

AC-MXNET-1G-DV2-B ~ V2.02 ~ 09/08/23

NOTICE: Please update the CBOX first before attempting an update on any endpoints. AC-MXNET-1G-DV2-B Firmware V2.02 requires CBOX firmware V2.55 or later, or CBOX-B firmware V4.09 or later, in order for RS-232 communication to function properly.

Release Notes:

V2.02
  1. Fixed an issue where MCU commands could bleed out of the RS-232 port of an endpoint. 
  2. Added USB5V control. NOTE: Only applicable on AC-MXNET-1G-DV2-B units on PCB V0.6 or higher.
  3. Further optimizations for RS-232 input/output.
V2.00
  1. Initial launch firmware for AC-MXNET-1G-DV2-B units. Firmware is distinguished from previous hardware model by using V2.XX firmware.
  2. Fixed a bug where additional data is returned when sending RS-232 data to a device through the CBOX.


    • Related Articles

    • AC-MXNET-10G-TCVR-B Firmware ~ V1.45 ~ 3/7/2025

      NOTE: If your AC-MXNET-10G-TCVR-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

    • AC-MXNET-10G-TCVR-PRO-B Firmware ~ V1.45 ~ 3/7/2025

      NOTE: If your AC-MXNET-10G-TCVR-PRO-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

    • AC-MXNET-10G-TCVR-AVDM-B Firmware ~ V1.45 ~ 3/7/2025

      NOTE: If your AC-MXNET-10G-TCVR-AVDM-B is not selectable to update in MENTOR, please see this Knowledge Base Article to determine what firmware you need to upload: ...

    • AC-MXNET-CBOX-B ~ V4.21 ~ 9/18/24

      NOTE: If your CBOX is reading firmware with a version number of V2.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-firmware Please update the CBOX first, before attempting updates on the ...

    • AC-MXNET-1G-EV2-B ~ V2.06 ~ 09/18/24

      NOTICE: Please update the CBOX first before attempting an update on any endpoints. Release Notes: V2.06 Added the ability to change the extracted audio processor's operational mode from normal operation to option "2", which delays extracted audio ...