AC-MXNET-1G-DANTE-DV2 Firmware Page

AC-MXNET-1G-DANTE-EV2 ~ V4.05 ~ 03/13/2025

NOTICE: Please update the CBOX first before attempting an update on any endpoints.

If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to determine what firmware to load onto your devices: https://support.avproedge.com/portal/en/kb/articles/how-to-determine-the-appropriate-firmware-on-an-mxnet-1g-ecosystem

Release Notes:
V4.05
  1. The device's front panel text will flip positions every 10S after a period of time from when the device is powered on. This is done to mitigate screen burn-in on the LCD display after an extended period of time.  
  2. Optimizations to HDR processing, in particular in regards to dynamic HDR metadata.
  3. Added API commands to change how MCU HDR/TMUT messages are processed, via the CBOX.
V4.01
  1. Added the ability to change the extracted audio processor's operational mode from normal operation to option "2", which delays extracted audio processing by 7 seconds upon a hot plug event. This is used to mitigate a specific issue where certain sources would lose extracted audio but HDMI audio output was still present after a timeframe of 12-48 hours. Use the CBOX command "config set device dspmode" to adjust. 
V4.00
      Initial Release. 

    • Related Articles

    • AC-MXNET-DANTE-CBOX Firmware ~ V1.03 ~ 5/9/25

      AC-MXNET-DANTE-CBOX Firmware Release Latest Firmware Download Link: https://avproglobal.egnyte.com/dl/BkbeznRHFz Conversion Firmware Download Link: https://avproglobal.egnyte.com/dl/oZQMfBbI1p Reversion Firmware Download Link: ...

    • AC-MXNET-1G-DANTE-DV2 ~ V4.01 ~ 03/13/2025

      NOTICE: Please update the CBOX first before attempting an update on any endpoints. If you cannot select your device on the CBOX using the downloaded firmware, you may have a device that is a different hardware iteration. Please see this article to ...

    • AC-MXNET-1G-DANTE-E ~ V1.22 ~ 03/13/2025

      NOTE: AC-MXNET-1G-DANTE-E firmware V1.16 or higher requires your AC-MXNET-CBOX to be updated to V2.55 / AC-MXNET-CBOX-B to V4.09 or later, or you may have issues with RS-232 transmissions. If you cannot select your device on the CBOX using the ...

    • An Introduction Guide to the AC-MXNET-DANTE-CBOX

      An Introduction Guide to the AC-MXNET-DANTE-CBOX This article goes over the majority of features that are currently available for the AC-MXNET-DANTE-CBOX, such as configuring and monitoring devices, performing route subscriptions, and more. ...

    • AC-MXNET-CBOX ~ V2.73 ~ 03/14/2025

      NOTICE: If your CBOX is reading firmware as a version of V4.XX, please navigate to this page here: https://support.avproedge.com/portal/en/kb/articles/ac-mxnet-cbox-b-firmware Note: Please update the CBOX first, before attempting updates on the ...