AC-MX1616-OUT-AUHD - V1.26 - 12-7-2020
This firmware fixed stuff.
In the Lab: Setting Up AC-MX1616-AUHD-HDBT
Jason Dustal walks through setting up the AC-MX1616-AUHD-HDBT, a 16 input and 16 output matrix switcher from AVPro Edge. From Installation to control and troubleshooting, learn about the AC-MX1616-AUHD-HDBT and how to set one up. Link to ...
How To: Managing EDID on the AC-MX88-AUHD-GEN2
The AC-MX44/MX88-AUHD has 29 factory defined EDID settings as well as 3 user memories. You can also choose to read the EDID from any OUTPUT. By default, the Matrix Switch is set to a 1080p EDID for maximum plug and play capability. If you are using ...
AC-MXNET-CBOX ~ V1.64 ~ 06/08/2021
Release Notes: 1.64 Added KVM Mouse Roaming to Mentor UI; Allowing for an HID Device to be shared on up to 17 Host Devices Improved MXNet A/V NETWORK POE PORT System Addressing for MXNet Encoders and Decoders - Link Local (IP Assigned by ...
Tech Tip: Fixing an Unstable Video Zone with the SC2
There are a few common issues that continue to plague A/V integrators all over the world. Sometimes these issues do not show up until after the installation, which cause truck rolls, cost labor hours, and ultimately affect the bottom line. These ...
AC-EX70-UHD-ARC-KIT: 70 Meter Extender with ARC and EDID Management
In this video Tom gives you the rundown on our AC-EX70-UHD-ARC, the point to point 4K HDMI extender that comes with ARC and EDID management. If you enjoyed this video consider subscribing here: https://bit.ly/Subscribe_AVPro_Edge