Release Date: 19 JUN 2025
Current Version Information:
MAIN MCU V2.09
OUT MCU V1.05
KEY MCU V2.01
NET MCU V1.14
MAIN FPGA V0.40
SPHE1 AUD V1.60
Release Notes:
19 JUN 2025
MAIN MCU V2.09
OUT MCU V1.05
NET MCU V1.14
MAIN FPGA V0.40
ENHANCEMENTS
- New Timing support: 1080P 49.95Hz, 1080P 50Hz, 4K 49.95Hz, 4K 50Hz.
- Add CMD:
SET OUTx SPDIF VOLy :Set Output x SPDIF Volume Levely{x=[0-1](0=All),y=[0(OFF),1~100(Audio Level),101(Bypass)]}
GET OUTx SPDIF VOL :Get Output x SPDIF Volume Level{x=[0-1](0=all)}
NOTE:Due to the hardware design, if the spdif output volume is set by the command: SET OUTx SPDIF VOLy, the volume of the balanced output will also change accordingly.
- Add Input/Output CEC Settings Commands:
SET CECRX INx ON/OFF : Set CEC Received Hex Byte From Input x Source On/OFF{x=[0~4](0=ALL)}
SET CECRX OUTx ON/OFF : Set CEC Received Hex Byte From Outputx Sink On/OFF{x=[0~1](0=ALL)}
GET CECRX INx : Get CEC Received Hex Byte From Input x Source On/OFF Status{x=[0~4](0=ALL)}
GET CECRX OUTx : Get CEC Received Hex Byte From Outputx Sink On/OFF Status{x=[0-1](0=ALL)}
11 MAR 2025
MAIN MCU V2.04
OUT MCU V1.04
NET MCU V1.10
MAIN FPGA V0.33
- Added multi view layout name command :
SET MV LAYOUTx NAME LENy :zz : Set Multiview Layout x Name Length y :zz
{x=[1~20],y=[0-15](Custom Name Length),zz=Custom Name(Space Characters Are Not Supported)}
GET MV LAYOUTx NAME : Get Multiview Layout x Name{x=[0~20](0=All)}
- Improved abnormal black screen when no signal present (PIP mode)
- Fixed contour problem of HDR to SDR
06 NOV 2024:
MAIN MCU V2.01
OUT MCU V1.03
KEY MCU V2.01
NET MCU V1.07
MAIN FPGA V0.29
SPHE1 AUD V1.60
Release Notes:
- Initial Release