AC-FRESCO-CAP-4 Firmware Release

AC-FRESCO-CAP-4 Firmware Release

Firmware Downloads: https://firmware.avproedge.com

Release Date: 25 APR 2025

Current Version Information:
  1. MAIN MCU V1.17
  2. MDIN MCU V1.03
  3. NET MCU V1.02

Release Notes:

25 APR 2025:
      MAIN MCU v1.17:
            - Fixed the issue where setting the output coordinate x1 to a value greater than 2160, the output coordinates will reset upon power cycle or reboot.

27 FEB 2025:
      MAIN MCU v1.15:
            - The front panel allows you to change IPV4 parameters.
            - Optimized the synchronization of all output videos in Videowall mode.
      MDIN MCU v1.03:
            - Optimized the synchronization of all output videos in Videowall mode.

15 NOV 2024
      MAIN MCU: 1.12
            - Resolved the output window size API command not adjusting the output rotation after setting the output parameter to 90°
      MDIN MCU: 1.02
            - Resolved the output window size API command not adjusting the output rotation after setting the output parameter to 90°
            - Limited Output Rotation to 90/270°
      NET MCU: 1.02
            - Resolved Web GUI not allowing for upgrade
            - Resolved Web GUI not showing Video Wall output parameters correctly

    • Related Articles

    • AC-FRESCO-CAP9: 1x9 4K HDR Video Wall Processor

      In this video Tom covers the Fresco Cap 9 Video Wall Processor. Capable of 3x3 4K HDR and Dolby Vision Video Walls. If you enjoyed this video consider subscribing here: https://bit.ly/Subscribe_AVPro_Edge%E2%80%8B

    • How To: Building a Video Wall

      A video wall doesn’t have to be the challenge most installers see it as today. In this article we have put together a step-by-step guide to use when building a video wall. In a culture of smart phones and short attention spans, a dynamic video wall ...

    • AC-FRESCO-CAP-9 Application Diagram

      AVPro Edge is committed to reducing our carbon footprint; Application Diagram(s) are Provided on the Attached PDF.

    • FRESCO Video Wall Controller (Legacy)

      CAP-4 UNITS WITH A SERIAL NUMBER STARTING WITH 1207 HAVE A NEW HTTP GUI! Example: 120724042300004 Learn how to access here: AC-FRESCO-CAP-4 Manual Learn how to access here: AC-FRESCO-4X Manual Current Version V1.57 Software is for the following ...

    • AC-AXION-8 Firmware Release

      Firmware Downloads: https://firmware.avproedge.com Release Date: 08 JUL 2022 Current Version Information: · MAIN MCU: 1.12 · AUX OUT MCU: 1.03 · AUX IN MCU: 1.12 · KEY MCU: 2.03 · NET MCU: 1.12 · FPGA: 1.23 · SPHE AUD: 1.60 Release Notes: · Fixed ...